NOWOŚĆ
Farbe
auf
Wunsch
Londyn 5 miękka biel
Oczywiście, każdy z naszych aluminiowych fusskreuze
można nabyć w razie potrzeby.
HERE ARE THE PRODUCTS...WHICH DO NOT EXIST AT ALL
BECAUSE WE PRODUCE COMPLETELY INDIVIDUALLY FOR YOU! Anyone who successfully configures furniture from components can also go one step further. Why not be a designer yourself? With proroll's design knowledge, your visions can be realised one-to-one. Because we produce exactly those components which you cannot find on the market...but which you would like to have to complete a round furniture concept.
With proroll at your side you say compromise "good bye„.
The market does not have it? Then we build it !
Foot cross series
"Wings"
2017
Task: Development and production of an innovative foot cross series with clear lines and a light, distinctive "wing" shape.
Special feature: Solid aluminium. Top side polished, bottom side powdered
Services of proroll:
- Design concept
- Creating a study
- Adaptation for two dome heights for both gliders and chair castors
- Production planning
- Tool development
- Series production
JOCKEY
Compact saddle seat for upholstering
2017
Task: Developing a compact and flat ergonomic saddle seat
Services of proroll:
- Development and design of a saddle seat
- Test for ergonomics when sitting and the optimal position of the leg slopes and the saddle height. Tool development
- Series production
Foot cross 780 flat
Making a
Foot cross by customer order
2017
Task: Design and manufacture of a base for armchairs and lounge furniture with high stability
Services of proroll:
- Product design
- Production planning
- Tooling
- Quality control
- mass production
Suitcase Roll
Design & manufacture of a compact roll for suitcases
2017
Task: Design and manufacture of a base for armchairs and lounge furniture with high stability
Services of proroll:
- Product design
- Production planning
- Tooling
- Quality control
- mass production
BatWing
Ergonomic seat mechanism as an extension set for existing seat mechanisms in use
2017
Task: Production of a 3D seat mechanism with a very low construction height, which can be extended to already used commercial seat mechanisms.
Services of proroll:
- Development and design of a very flat ergonomic seat mechanism in a combination of spring steel and rubber buffers for easy screwing on.
3Matic
Ergonomic seat mechanism as an extension to the AM15
2017
Task: AM 15 Mechanics is intended to extend the range of functions of ergonomic seats by economically simple means.
Services of proroll:
- Development of a 3D seat mechanism with matched "high-performance rubber buffers" with low installation height and easy mounting on the seat mechanism AM15
PUZP400 pro
Ergonomic stool seat in polyurethane in two hardnesses for upholstering
2016
Task: Producing a very ergonomically shaped stool seat with a large comfortable seat surface. The two leg indentations provide more legroom and relief for the leg tissue.
Services of proroll:
- Development and design of a stool seat
- Test for ergonomics when sitting and the optimum position of the leg recesses
- Tool development
- Series production
Foot cross series
"Root"
2016
Task: Development and production of a curved base with a shape reminiscent of firmly anchored tree roots.
Target: Create base with unique design
Services of proroll:
- Development of a base with its very own design language
- Production planning
- Tool development
- Series production
Foot cross series
"Berlin"
2015
Task: Development and production of an innovative and timeless foot cross series with clear lines and reduced design language.
Target: Foot cross series with 4 and 5 feet for versatile use
Services of proroll:
- Design concept
- Creating a study
- Adaptation for a 4 and 5 foot cross
- Production planning
- Tool development
- Series production
Retread:
Apparatus rolls
Series 253
2015
Task:Revision of the existing roller series 251 and 252. Questioning of components, updating of the design and customer
incorporate desired features
Target: Series 253 manufactured in-house
Services of proroll:
- rework design
- Improve physics
- Steer FEM in the housing
- Tool development
- Series production
Foot cross series
"London 5 KU"
Best competence in plastics manufacturing
2015
Task: Development of a plastic base of the series "London" with the same design specifications as from the complete series
Target: Lightweight and high-quality base made from solid plastic material
Services of proroll:
- Adapt design concept
- Testing plastics for suitability
- Create load test
- Product design
- Production planning
- Tool development
- Series production
Manufacture of an existing customer product
2014
Task: Transfer of the tooling from Italy to our location in Poland. Series production of the base
Target: Adjust delivery times and frequency. Improve product quality and variety.
Services of proroll:
- Relocation of the tool to our location
- Manufacture of the base with improved quality
- Increase product variety through new surface designs
- Just in time delivery to the customer
Product update
SM95
2014
Task: Further optimize existing product SM90. Add product improvements.
Target: SM95 more stable design. Do without weld seams. Significantly improve the look and feel.
Services of proroll:
- Market analysis
- Product Market Scanning
- Analyze & implement product improvements
Product series extended
LONDON_5 BABY.
2014
Task:product series LONDON by a base with a very small diameter (only 520mm).
Target: Meet demand for small design base. Increase product diversity.
Services of proroll:
- Market analysis
- Product Market Scanning
- Analyze & implement product improvements
Own product
AM90
2013
Task: Development of a chair mechanism with a new design concept for an extended clientele.
Target: Chair mechanism with 360° ring release with good design and easy to install.
Services of proroll:
- Adaptation concept
- Product design
- Production planning
- Tooling
- Quality control
- Series production
Reference product
2013
Task: Design and manufacture of a foot glider system with a combinable floor
Target: Foot glider should be easy to adjust to hard and soft floors.
Services of proroll:
- Design concept
- Adaption with felt glider
- Product design
- Production planning
- Tool development
- Series production
Own product
BatMatic
2011
Task: Development of a completely new chair mechanism for active sitting.
Target: The mechanism is designed to enable ergonomic sitting. Support the spine and ensure a dynamic sitting posture.
Services of proroll:
- New development
- Product design
- Production planning
- Tooling
- Quality control
- Series production
Own product
Foot cross series "LONDON
2011
Task: Design and manufacture of an innovative and timeless foot cross series
Target: Foot cross series with 3, 4, 5 feet for lounge, meeting and office.
Made of solid aluminium - closed
Services of proroll:
- Design concept
- Creating a study
- Adaptation for a 3, 4 and 5 foot cross
- Production planning
- Tool development
- Series production
Customization
Roll design
2010
Customer request: The colouring and design of the roll is adapted to the use on ash courts
Target: Precisely adjust wheel color to the operating environment
Services of proroll:
- Powder-coating roller housing in RAL colour
- Produce wheel and wheel bandage in matching colour
Customization
Chair mechanism SM15
with tension spring
2010
Customer request: The release lever should always rest pretensioned on the gas pressure column release.
Target: Cost-effective and simple solution for noiseless handling of the release lever
Services of proroll:
- Idea generation
- test different approaches
- cost-benefit analysis
- Installation test
- Mounting
- Series production
Reference product
2008 I Model
2010 II Model
Task: Realization of an individual base for a work chair manufacturer from Holland
Target: The base is intended to continue the design concept of the chair series in detail.
Services of proroll:
- 3D modeling
- Load analysis
- technical product design
- Tool design
- Production preparation
- Series production
- Store & Deliver on Demand
Customization
Chair mechanism AM15
with 3° Seat inclination
2009
Customer request: The seat shall be inclined by 3°.
Target: Cost-effective and very simple solution for an existing chair structure
Services of proroll:
- Idea generation
- test different approaches
- cost-benefit analysis
- Installation test
- Series production
Own product
Chair & Stool Mechanics AM15
2009
Task: Design and manufacture of a simple chair and stool mechanism made of cast aluminium
Target: Low cost and highly compatible mechanics with good design
Services of proroll:
- Market study
- Product study
- Product design
- Test series / utility model
- Production planning
- Tool development
- Series production
Reference product
2008
Task: Realization of a base for an ergonomic seating furniture
Target: The 3D movement mechanism developed by the customer must be fully integrated into the base
Services of proroll:
- Adaptation concept
- Product design
- Production planning
- Quality control
- Support of the pilot series
- Production
